Atom Pro 96K 12V Battery Pack from Powapacs

SKUPP015

IMPORTANT INFORMATION: This product has been discontinued, so limited stock is available. Please instead consider our other CPAP batteries.

The new Atom Pro 96K is the third generation of portable power stations from Powapacs and is ideal for powering your devices on your travels. The integrated Lithium-Ion battery makes the Atom Pro a compact power station weighing just 2kg, allowing almost all electrical devices up to 150 watts to be run from it.

The new device holds the biggest battery capacity of 346Wh, 32Ah and 12V DC. The power pack can charge laptops, phones and more whilst you’re away from home. Featuring 6 outputs, the Atom Pro 96k is suitable for powering any CPAP machine – and, in some cases, even when using a humidifier!

To effectively use this battery pack with your CPAP machine, you will need a machine-specific 12V DC cable; find our options on our CPAP 12V DC Cables Page.

This product is not eligible for VAT relief.

The price shown includes VAT applied at the UK standard rate of 20%, chargeable on all UK orders. Orders outside of the UK will have the VAT removed during the checkout process.

£400.00Inc. VAT

In Stock

The New Atom Pro Gives You Portable Power

The Atom Power Pack can power your devices, including your phone and laptop, while you’re away from home.

IMPORTANT NOTICE: In order to effectively use this battery pack with your CPAP machine, you will need a 12V DC cable; find our machine-specific options here.

The Atom Pro 96K is the third generation of portable power stations from Powapacs and is ideal for powering your CPAP machine on your travels. The integrated Lithium-Ion battery makes the Atom Pro a compact power station weighing just 2kg, allowing almost all electrical devices up to 150 watts to be run from it. With a battery capacity of 346Wh and both 12V DC and 230V AC sockets, the Atom Pro is suitable for powering any CPAP machine – and even some humidifiers, provided they’re within the 150W limit!

Please be aware that the high capacity of this battery means it will be too large for most airlines to accept on board – either in the hold or in your hand luggage. If you need to take a battery pack on a flight, please consider the smaller, flight-friendly Powapacs ION Battery Pack.

Most battery packs have a 12V output only – which is great for most CPAP machines as often the manufacturer will produce a 12V cable. However, not all machines have a 12V power option – in which case a 230V AC power supply is the only option. The Atom Pro can do both.

Estimated running times

When powering a CPAP machine (without a humidifier) via a 12V cable, the Atom Pro’s huge capacity means you can expect up to a week’s worth of power on a single charge, depending on your particular CPAP machine and pressure requirements. Here is a table of estimated run times using a 12V DC connection with no humidifier:

CPAP Machine 5cmH2O 10cmH2O 15cmH2O 20cmH2O
ResMed AirSense 10 (all) 28 hours 20 hours 17 hours 12 hours
ResMed S9 AutoSet / Escape 25 hours 22 hours 19 hours 17 hours
ResMed S8 AutoSet / Escape 25 hours 23 hours 15 hours 13 hours
Philips REMstar 60 Auto / Pro 60 hours 40 hours 29 hours 23 hours
DreamStation Auto / Pro TBC 35 hours TBC TBC
Prisma SmartPlus Auto 28 hours 20 hours 17 hours 12 hours
ResMed AirMini 140 hours 80 hours 45 hours 33 hours

IMPORTANT INFORMATION: The estimated run times are based on using a 12V power cable without a humidifier.

The above times are estimates only and are not guaranteed. Actual running times will vary based on multiple factors, including machine, pressure setting, altitudes, mask leakage, exhalation relief, and more. When charging the Atom Pro, it takes approximately 5-6 hours to go from 0% to 100% using the mains charger.

If using the 230V option, run times will be reduced as this is a less efficient way of getting power from the battery to the machine. Running times will be around 70% of the estimates above, so we recommend using the appropriate 12V cable for your machine rather than the mains lead where possible.

Power your CPAP and humidifier!

You can use the new Atom Pro to also power your humidifier – provided that the power requirement of your machine and humidifier are 150W or less. Please check the electrical requirements section of your CPAP machine’s user manual. If using a humidifier – run times will be significantly less than the times above.

Heated humidifiers use a lot more electricity than a CPAP machine by itself. Running times will be around 20-30% of the estimates above – in most cases, still enough for a couple of nights’ use per charge. Before the Atom Pro, the only real option for portable power with a humidifier was a bulky, heavy deep-sea battery. Now it is much easier to continue to benefit from humidified CPAP therapy while on the move, provided your humidifier requires 150W or less to run.

If you need humidification while travelling, we recommend a Waterless Humidifier. These are small filter-type devices that sit between your mask and tube, recycling the humidity from your exhaled breath. This provides a good level of humidification without needing a heated humidifier, meaning you will be able to get considerably more use from your Ion Pro Battery Pack. Many travel devices, such as the AirMini and M1 Mini, offer compatible waterless humidification options.

Which 12V cable do I need?

We recommend using the appropriate 12V power adapter to connect this battery to your CPAP machine, which will provide greater efficiency (and therefore run times) than the mains lead. Intus provide most of the appropriate cables, which you can find below:

  • Philips Respironics Machines – You will need a Philips DC Cable
  • DeVilbiss SleepCube – You will need the SleepCube DC Cable
  • Somnetics Transcend – You will need the Transcend DC Cable
  • *ResMed S8 – S8 Converter 33942 is only available from ResMed directly
  • *ResMed S9 – S9 Converter 36970 is only available from ResMed directly
  • *ResMed AirSense 10 – Air 10 DC-DC Converter 37297 is only available from ResMed directly
  • *ResMed AirMini – AirMini DC/DC Converter 38839 only available from ResMed directly
  • BMC M1 Mini – You will need the M1 Mini DC Cable

*Please note that ResMed states that their cables are “not for aircraft use”. Please bear this in mind if planning to use your ResMed machine on a flight. We suspect that means not to use the cable directly into the aircraft power supply should there be a socket available at your seat. It is difficult to see why you would not be able to use it with an independent battery source such as this one. However, the wording on this note is unclear. We would strongly recommend seeking clarification from ResMed and your airline as to whether or not it will be ok to use this cable on a flight with an independent battery pack rather than the aircraft’s power.

Features & benefits of the Atom Pro CPAP Battery Pack

The Atom Pro 96K has a real-time display showing the battery level and input and output modes. It is equipped with USB, USB-C PD, DC and AC outputs.

  • Atom Pro can be charged in three different ways: mains supply, solar panel or via a 12-24V car adaptor.
  • High efficiency silent, pure sine wave inverter, 150W constant 200W peak power rating.
  • Overload/voltage/temperature protection.
  • Short circuit/low voltage protection.
  • Digital User Information Display and Integrated LED torch.
  • Capacity – 96,000mAh 346Wh. 32Ah @12v
  • Battery – High discharging rated 18650 lithium battery.
  • Dimensions – 240mm x 165mm x 65mm
  • Weight – 2.1kg
  • Carry case included
  • 2-year warranty

The Atom has a range of 6 outputs and is suitable for charging smartphones, tablets, laptops, drones, lighting and other equipment. It is the “must have” mobile power solution for your holiday at the campsite, the fishing lake or during a survival holiday.

Additional information

Dimensions 24 × 16.5 × 6.5 cm
Manufacturer

Powapacs

Made In

United Kingdom

Condition

New

Warranty

2 Years

CE/UKCA Certified

Yes

Packaged weight

3.8kg

Battery capacity

96,000mAh 346Wh. 32Ah @12V

Compatible with

Any CPAP machine with 12v cable option

Weight (battery unit)

2.1kg

Charge battery via

Mains, solar or via a 12-24V car adapter