DreamStation Heated Tube


The compatible 15mm Heated Tube is for the Auto CPAP Machines.This tube is not compatible with the Dreamstation Go Auto Travel CPAP machine or Dreamstation 2 Auto CPAP machine.

This product is eligible for VAT relief

VAT on this product will be charged at 0% if VAT relief is claimed at the final stage of the checkout process. Please be aware VAT will show at 20% until that point. Full details can be found here and at the checkout.

£42.99with VAT Relief
£51.59without VAT Relief

Out of Stock

The Heated Tube by Philips Respironics is specially designed to maintain a consistent temperature and pressure throughout the process of the air leaving the humidifier and reaching the mask. It is designed for the DreamStation range by Philips Respironics only, and will not work with any other machines, including alternative models from Philips Respironics.

The purpose of the specially designed heated tubing is to prevent the build up of condensation, also referred to as rainout, whilst keeping the air travelling through the tube at a consistent temperature. The heated tubing can be set to five different temperature settings, with 0 being off and 5 being the warmest temperature setting. If you decide that you do not want the tube to heat but still want to use it as a standard connector tube, then the tube can be set to 0, which means that heat from the tube is disabled.

It is possible to directly connect the tubing to the DreamStation Auto & Pro CPAP machines, however, if the humidifier is not being used, then the hose will not heat so you might want to opt for a standard CPAP tube.

Additional information

Weight150 g
Dimensions18 × 6 × 6 cm
Fits Any CPAP Machine

DreamStation machines with heater humidifier only (not including Go models), No

CE Certified


Tubing Type




Latex Free


Manufacturer's Warranty

3 Months

Tube Connection Size


Tube Length

6ft / 183cm

Tube Ends